EOTECH

RETICLE INDEX

HWS

®

HOLOGRAPHIC WEAPON SIGHTS

RETICLE OFFERINGS

0-RETICLE

The 68 MOA ring with 1 MOA dot is ideal for fast target acquisition It provides three usable aiming points. The aiming points above were based on the following load: 223 Cal 62 Gr 2,900 Vel. Other loads and calibers can also be used, but the operator will have to establish the ranges associated with the aiming points. When using a shotgun, the 68 MOA ring can be used to represent shot patterns, but will vary based on choke and shell selection.

UNIT OF MEASURE:
MOA
RETICLE COVER AVAILABLE:

DCR

A 68 MOA ring with the top cutout and an easy-to-locate chevron at the bottom. Zero your .223/5.56 rifle at 50 yards and the DCR™ offers confident aiming points for up to 200 yards, with an additional 7-yard close-range solution at the chevron point.

PRODUCT OFFERINGS:
EXPS3 DCR
UNIT OF MEASURE:
MOA
RETICLE COVER AVAILABLE:

1-RETICLE

The 1 MOA dot-only reticle is ideal for users familiar with red dot sights, offering the simplicity of a single dot with the enhanced benefits of the HWS®.

PRODUCT OFFERINGS:
EXPS3, XPS2
UNIT OF MEASURE:
MOA
RETICLE COVER AVAILABLE:

2-RETICLE

The two-dot reticle pattern can be easily distinguished with or without Magnification. It provides four usable aiming points. The aiming points are based on the following load: 223 Cal 62 Gr 2,900 Vel. Other loads and calibers can also be used, but the user will have to establish the ranges associated with the aiming points.

PRODUCT OFFERINGS:
EXPS3, EXPS2, XPS3, XPS2, 518
UNIT OF MEASURE:
MOA
RETICLE COVER AVAILABLE:

.300 BLK

The two-dot reticle pattern in the 300 Blackout model provides two usable aiming points for both subsonic and supersonic rounds. Calculated using a 16" barrel and 110 Gr supersonic and 220 Gr subsonic ammunition.

PRODUCT OFFERINGS:
300 Blackout
UNIT OF MEASURE:
MOA
RETICLE COVER AVAILABLE:

4-RETICLE

This ballistic reticle is optimized for use with 5.56 NATO/.223 Cal. with 62 Gr. M855 FMJ rounds at approximately 2,680 fps from a 14.5" barrel. Note that the aiming dots may not be clearly distinguishable without Magnification.

PRODUCT OFFERINGS:
EXPS3
UNIT OF MEASURE:
MOA
RETICLE COVER AVAILABLE:

XR308 RETICLE

The XR308 reticle is specifically designed for the military M240 machine gun. It’s calibrated for .308 Cal., 150 Gr. M59 FMJ rounds at approximately 2,800 fps from a 24.8" barrel.

PRODUCT OFFERINGS:
Currently Unavailable - Informational Only
UNIT OF MEASURE:
MOA
RETICLE COVER AVAILABLE:

×